Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / registration.fm / 16.09.2005
Using several handsets
De-registering handsets
You can de-register any registered handset
from any registered Gigaset S58 handset.
u
Open list of internal users.
The handset you are currently
using is indicated by <.
s
Select the internal user you
wish to de-register.
v
Open menu.
De-reg. H/Set No.
Select and press
~
Enter current System PIN and
press
Press the display key.
§Yes§
Locating a handset ("Paging")
You can locate your handset using the
base station.
¤
Briefly press the registration/paging
key on the base station.
¤
All handsets will ring at the same time
("Paging"), even if the ringers are
switched off.
Ending paging
÷ / c Briefly press the registration/
paging key on the base station
or the talk key on the handset.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception
¢
¢
v
Ð
Handset
s
Select one of the registered
base stations or
press
22
.
§OK§
.
§OK§
(Best
Base).
¢
Select Base
and
Best Base
.
§OK§
Changing the name of the
base station
Names "Base 1" to "Base 4" are assigned
automatically. The name of the base sta-
tion is handset-specific, i.e. the base sta-
tion receives the name which was
assigned by the handset. The same base
station can have different names on dif-
ferent handsets. You can change the
name of your base station.
¢
¢
v
Ð
Handset
s
Select base station and
press
.
§Edit§
~
Enter new name, max. of
16 characters (page 38).
Press the display key to save
§Save§
the setting.
a
Press and hold (idle status).
Making internal calls
Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
u
Initiate internal call.
~
Enter the number of the hand-
set.
Or:
u
Initiate internal call.
s
Select handset.
c
Press the talk key.
Calling all handsets ("group call")
u
Initiate internal call.
*
Press the star key. All handsets
are called.
Ending calls
a
Press the end call key.
¢
Select Base