Date And Time; Setting The Date And Time; Setting The Alarm Clock - Siemens Gigaset SL100 Instructions Manual

Date and Time

Setting the date and time

Correct date and time settings are essential if you want to know exactly when callswere
received. You can choose between 12-hour and 24-hour display (factory setting) for the
time (a.m. = 1st half of the day; p.m. = 2nd half of the day).
¢
v
Calendar/Clock
~
s ~
s r
[RRRRRRRRRRRRRRRRRRRRR]
Save
If you have selected the 12-hour display, on the Time: line you can use the display key
to toggle between am and pm.
am/pm

Setting the alarm clock

Precondition: You have set the date and time.
Activating and setting the alarm clock
¢
v
Calendar/Clock
r
s ~
[RRRRRRRRRRRRRRRRRRRRR]
am/pm
[RRRRRRRRRRRRRRRRRRRRR]
Save
a
The alarm will only ring if handset is in the idle status. There will be
◆
no alarm ring with room monitor activated, during a call or automatic
i
last number redial.
To find out how to set the wake-up volume and melody, turn to
◆
page 66.
¢
Date/Time
Entering the date: Enter the day/month/year in the
Date: line.
Entering the time: Scroll to the Time: line and enter
the hours/minutes (4-digit)
Selecting display mode: Scroll to the Time Mode:
line and choose between 12-hour and 24-hour
mode.
Now press the display key to confirm the entry.
¢
Alarm Clock
Activating the alarm clock: In the line Room M.:
select On.
Entering the alarm call: Scroll to the Time: line and
enter the hours/minutes (4-digit), e.g.
QM15 for "7:15 a.m.".
If 12-hour mode is set:
Now press the display key to switch between am and
pm.
Now press the display key to confirm the entry.
Long press (back to idle status). You will see the
¼ icon.
Date and Time
.
14