Errors When Sending And Receiving A Text Message - Siemens Gigaset SL100 Instructions Manual

Errors when sending and receiving a text message

Errors when sending a text message
The following error codes are displayed:
Error Code Description
E0 Calling Line Identification permanently withheld (CLIR).
Calling Line Identification is not enabled.
FE Error occurred during message transfer.
FD Connection to SMS centre failed.
Text messages cannot be sent or received if the number of an SMS cen-
tre is missing or incorrectly stored. Check that the number of the SMS
centre has been correctly stored.
Errors when receiving a text message
A message appears on the screen if your phone cannot receive any more text messages.
You cannot receive text messages under the following conditions:
The CLIP service (Calling Line Identification Presentation) is not activated for your
◆
phone line,
Call diversion is activated with When: All Calls ,
◆
Call diversion All Calls is activated for the network mailbox,
◆
The memory (incoming and draft message lists) is full.
◆
SMS (Text Messages)
54