Opening Lists With The Message Key - Siemens Gigaset SL100 Instructions Manual

Opening lists with the message key

You can use the message key f to open the following lists:
1. SMS list,
2. Calls list.
As soon as a new entry (a call and/or a text message) arrives in one or more of the lists,
the f key
flashes and you hear an advisory tone. If you now press the flashing f key but you do
not open any of the lists but instead close the menu, the f key continues to flash.
If you press the flashing f key and open one of the lists, when you close the list the
key will stop flashing even if one of the other lists still contains new entries. If there is
at least one new entry, you can set the f key "flashing" again, i.e. reactivate it. This
will let others, e.g. members of your family/your office colleagues, know that they have
received new messages.
The following lists are displayed when you press f:
If only one list has new entries, you will see the first new entry in that list.
◆
If several lists have new entries, those lists are offered for your selection.
◆
If there are no new messages in any of the lists, then all the lists are offered for your
◆
selection.
If calls are stored in the network mailbox, you will see a message if the correct set-
◆
ting has been made (refer to the network mailbox operating instructions).
Setting the message key to "flashing"/deactivating the message key
Precondition: There is still one new entry in one of the lists.
f
s
Mark as new
a
The key only flashes until it is pressed again and a list or list entry is opened.
Calls list
The numbers of the last 30 calls are saved in the calls list. The oldest entry is deleted
when the calls list is full and new entries are added.
Precondition: The caller's number has been identified (page 17).
Depending on the setting, either All Calls or only Missed Calls (factory setting) will be
saved (page 31).
Depending on this setting, several calls from the same number are entered in the calls
list as follows:
More than once when All Calls is set,
◆
Once and only the last missed call when Missed Calls is set.
◆
Open the calls list.
Select the menu item and confirm.
OK
Long press (back to idle status).
Using the directory and other lists
30