Accepting/Rejecting Call Waiting During An Internal Call; Listening In To An External Call; Using A Handset As A Room Monitor - Siemens Gigaset SL100 Instructions Manual

Accepting/rejecting call waiting during an internal call

If you get an external call while conducting an internal call, you will hear the call wait-
ing tone (short tone). The caller's number or name will appear in the display if Calling
Line Identification is enabled. If you reject the call waiting tone on your handset, it can
still be heard on other registered handsets.
either ...
[RRRRRRRRRRRRRRRRRRRRR]
Accept
or ...
[RRRRRRRRRRRRRRRRRRRRR]
Reject

Listening in to an external call

You are conducting an external call. An internal party can listen in to this call and can
speak as well. A signal tone indicates "listening in" to all call parties.
Precondition: The Listening In function is activated (factory setting: Off).
Activating/deactivating "internal listening in"
¢
v
Base Settings
~
OK
a
Internal listening in
On your handset you see In use. You wish to listen in to this external call.
c
a
If the first internal party presses the "end call" key a, a signal tone
i
sounds. The handset that is "listening in" is still connected to the external
party however.

Using a handset as a room monitor

With this function, a previously stored internal or external number is called when a set
noise level in the room is reached (the baby cries). When you answer the call you hear
the noise in the baby's room. The room monitor remains activated on the handset even
after you hang up.
Cancelling internal call, accepting external call:
Press the display key. The internal call is ended. You
are connected to the external caller.
Reject external call:
Press the display key. The call waiting tone is deacti-
vated. You are still connected to the internal caller.
¢ ¢
Add. Features
Enter the system PIN (page 72) and confirm
(‰ = On).
Long press (back to idle status).
Press the talk key. You can now listen in to the call.
All parties hear a signal tone.
Ending listening in:
Press the end call key (signal tone).
Listening In
Using several handsets
60