Voice-Activated Dialling - Siemens Gigaset SL100 Instructions Manual

Using the directory and other lists

Voice-activated dialling

With voice-activated dialling, you dial simply by speaking the name of the person you
wish to call. To do this, you first have to store a voice pattern, i.e. the name which you
speak will be stored in the handset.
Up to four users can record a voice pattern for an entry. Before users record a voice pat-
tern, they first have to "identify" themselves, e.g. as User 2.
A maximum of 23 voice patterns can be stored for directory entries. If a voice pattern
is stored for an entry in the directory, then that entry is marked ´.
Recording a voice pattern for an existing entry
Record your voice pattern in quiet surroundings. The handset should be around 25 cm
away from you.
s
s
R[RRRRRRRRRRRRRRRRRRR]
Voice
s
User 2
[RRRRRRRRRRRRRRRRRRRRR]
record.
OK
a
If you want to change the voice pattern, you have to delete it (page 26) and then record
it again.
If your two recordings are too different from each other, you will be
◆
prompted to repeat them.
i
A message tells you if your speech pattern is too much like another
◆
user's. Close this message with
pattern recording sequence and repeat the recording.
Using voice-activated dialling
t
The display prompts you to speak. Select the voice pattern, e.g. Anna. If the name
matches the recorded voice pattern, it is repeated. The telephone number is dialled.
25
Step 1: Open the directory for voice-activated
dialling:
Open the directory.
Select the entry and press the display key.
Select and confirm, e.g. User 2.
OK
Step 2: Begin recording:
Press the display key.
Confirm the display prompt. Speak the name when
prompted to do so by the display. Repeat the name
when prompted to do so. Your recording is stored
automatically.
Long press (back to idle status).
Press.
Ý
, go back to the start of the voice