Iv. Installing The Navigation Software - Medion P4410 Operating Instructions Manual

Your navigation system will use a low amount of electricity and the batteries will be
discharged, even when it is in the standby mode.

IV. Installing the Navigation Software

The final installation of the navigation software will take place automatically from
the internal memory, during the initial setting up, if your device has already been
equipped with the basic data of the navigation software at the factory. Follow the
instructions on the screen.
An optional memory card must always have to be inserted in the device while the
navigation system is being used.
It will be necessary to carry out a Reset to restart the navigation system if the mem-
ory card has been removed (see page 17).
Please also read the chapter Navigation starting on page 18.
Initial Set-up
15