Appendix; Special Cleanup Function - Medion P4410 Operating Instructions Manual

Appendix

Special CleanUp Function

The CleanUp function allows the targeted deletion of data, without using a PC.
IMPORTANT
Please use this function very carefully, because it is possible for data
to be deleted that can only be entered again manually afterwards.
The CleanUp function is activated when the 'o' is pressed in the Gopal lettering of
the Main Menu, immediately after the start tone following a reset.
The CleanUp function offers 6 options:
1. Remove Installation Only
Removes the software installed from the 'My Flash Disk'
memory [= part of the permanent memory in which the executable parts of the
navigation software will be located following the initial alignment (\My Flash
Disk\Navigation)].
2. Remove MAP Only
Removes the digital maps from the 'My Flash Disk' memory (\My Flash
Disk\MapRegions).
3. Remove Preload Only
Removes the data needed for the installation of the navigation software from the
permanent memory (\My Flash Disk\Install).
4. Remove All
Deletes the whole contents of the 'My Flash Disk' memory. It will not be neces-
sary to recalibrate the screen after this function has been carried out.
Appendix
43