Working With Memory Cards; Inserting Memory Cards; Removing Memory Cards; Accessing Memory Cards - Medion P4410 Operating Instructions Manual

Working with Memory Cards

Your navigation system supports MMC and SD memory cards.

Inserting Memory Cards

1.
Carefully take the optional memory card out of its packing (if included).
Take care not to touch or dirty the contacts.
2.
Insert the memory card carefully into the card bay with contacts pointing
forward. The card must lock easily.

Removing Memory Cards

Note
Only remove the memory card if the navigation software has been
closed and the device has been switched off by means of the On/Off
button beforehand. Otherwise you will risk a loss of data.
3. To remove the card press lightly onto the upper edge until it ejects.
4. Pull the card out without touching the contacts.
5. Store the memory card in the packing or in another safe location.
Note
Memory cards are very fragile. Take care not to dirty the contacts and
not to force the card.

Accessing Memory Cards

•
The appliance only supports memory cards in the FAT16/32 file format. If
you insert a card prepared with a different format (e.g. in cameras, MP3
players), your navigation system may not recognize it and will ask you to
format it again.
Warning
Formatting the memory card irretrievably wipes out all data.

Data exchange via Card Reader

If you wish to copy large quantities of data (MP3 files, navigation maps) to the
memory card, these can also be stored directly to the memory card.
Many computers already have memory card devices. Insert the card in this and
copy the data directly to the card.
Because of the direct access you can achieve a much higher transfer rate compared
to using ActiveSync®.
50
English