Electromagnetic Compatibility; Connection; Power Supply Through Car Adapter; Cabling - Medion P4410 Operating Instructions Manual

Electromagnetic Compatibility

•
When connecting additional or other components the "Electromagnetic
Compatibility Directive" (EMC) must be adhered to. Please also note that
only screened cable (maximum 10ft) should be used with this appliance.
•
For optimal performance, maintain a distance of at least 10 ft. from sources
of high-frequency and magnetic interference (televisions, loudspeaker sys-
tems, mobile telephones etc. This will help avoid malfunctions and loss of
data.
•
Electronic devices emit electromagnetic waves during operation.
These emissions are harmless, but can interfere with other devices operated
in close proximity.
While our devices are tested and optimized for electromagnetic compliance
in our laboratories, interference during operation may still occur in the de-
vice itself and with other devices in its proximity.
Should such interference occur, try to eliminate it by adjusting the posi-
tions of and the distances between the devices.
Before driving a car, please ensure that the electronic systems of the car are
working properly.

Connection

When connecting your appliance be sure to correctly observe the following instruc-
tions:

Power supply through Car Adapter

•
The car adapter should only be connected to the lighter socket of a car
(car battery = DC 12V
doubt about the power source in your car, contact your car manufacturer.

Cabling

•
Arrange cables so that no-one can tread on them or trip over them.
•
Do not place any items on the cable.
, truck battery = DC 24V
Safety and Maintenance
!). If you are in any
3