Additional Card Material; Transfer Of Card Material To A Memory Card - Medion P4410 Operating Instructions Manual

Additional Card Material

Your navigation system is already equipped with digitalized map material in the
internal memory at the factory. Depending on the configuration, additional maps
may be included on your your CD/DVD. You will be able to transfer these cards to a
memory card immediately. Here, it is recommended to use an external card reader
(see also page 50). The GoPal Assistant supplied with the device enables a simple
and individual compilation of the map material to be transferred.
Depending on the amount of map data on the navigation CDs/DVDs, memory
cards with capacities of 256 MB, 512 MB, 1.024 MB or more may be required.
You can obtain additional memory cards (MMC or SD cards) in specialist stores.

Transfer of card material to a memory card

The transfer of additional card material to a memory card can take place through
the Explorer of your PCs. Proceed as follows:
1.
Insert the CD/DVD with the card material required.
2.
Start your workstation and select your CD/DVD Drive.
3.
Copy the file with the .psf ending out of the Directory of the region that you
require to the MapRegions Directory on your memory card, from the
CD/DVD.
You can transfer several files with map material to your memory card, depending
on the capacity of the memory card.
If you have copied digitized maps of several countries or country groups onto your
memory card, you will be required to select the desired map in the navigation
application of your device.
Appendix
51