Supported Erp Service Types; Configuring Service Tunnels On 9500 Mpr Devices; Procedure 9-1 To Create An Ethernet Radio Ring Element On A; 9500 Mpr - Alcatel-Lucent 5620 User Manual

9 — 9500 MPR service management and service tunnels
For the service workflow, you must choose the hybrid paths/rings and the service
endpoint delivery node.
For the 9500 MPRe, a single hop is supported by allowing a service to terminate on
a network radio port. The service terminates on the radio port as a network
attachment with a remote node is the target. You can add a manual link for the
9500 MPRe on the 5620 SAM map to provide a representation of the
9500 MPRe-to-MSS relationship on the ring. A one-hop 9500 MPRe tail node can
also be used in a more traditional 9500 MPR network.

Supported ERP service types

You can configure the following service types in an ERP (G.8032) topology using
the 5620 SAM on 9500 MPR/9500 MPRe devices:
•
VLAN service
•
•
VLL service (Cpipe service only)
•
9.4

Configuring service tunnels on 9500 MPR devices

Use the following procedures to configure service tunnels for 9500 MPR devices.
See the "Service tunnels" chapter in the 5620 SAM User Guide for the generic
procedures that apply to this device type.

Procedure 9-1 To create an Ethernet radio ring element on a

9500 MPR

Ethernet radio ring elements are supported on the 9500 MPR, Release 3.1 or later
devices.
Create the ERP topology
1 Right-click on a 9500 MPR NE, and select Properties from the drop-down menu. A
Network Element [Edit] form opens with the General tab selected.
2 Click on the Radio Ring Component tab button.
3 Click on the Create button. The Radio Ring Component new Object [Create] form
opens.
4 Configure the ID and Topology Name parameters.
5 Click on the Select button beside the East Port Name parameter. The Select East
Port - Radio Ring Component - new Object form opens.
6 Choose a port for the east port and click on the OK button.
7 Click on the Select button beside the West Port Name parameter. The Select West
Port - Radio Ring Component - new Object form opens.
8 Choose a port for the west port and click on the OK button.
9-10
9500 MPR, Release 3.1 or later
9500 MPR, Release 3.1 or later
September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide