Procedure 4-4 To Configure A Scope Of Command Role For Neto; Access - Alcatel-Lucent 5620 User Manual

Procedure 4-4 To configure a scope of command role for NEtO access
1 Using an account with an assigned security scope of command role, choose
Administration→Security→5620 SAM User Security from the 5620 SAM main menu.
The 5620 SAM User Security - Security Management (Edit) form opens with the
General tab displayed.
2 Click on the Scope of Command tab.
3 Click on the Create button and choose Profile. The Scope of Command Profile
(Create) form opens with the General tab displayed.
4 Configure the parameters:
•
•
•
•
5 Click on the Roles tab and click on the Add button. The Select Role - Role form
opens.
6 Perform one of the following:
a
b
c
7 Click on the OK button. The Select Role - Role form closes and a dialog box
appears.
8 Click on the OK button.
9 Click on the OK button. The Scope of Command Profile (Create) form closes.
10 Close the 5620 SAM User Security - Security Management (Edit) form.
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Auto-Assign ID
Profile ID
Profile Name
Description
Choose Admin NEtO launch to open the NEtO with the administration profile.
Choose Viewer NEtO launch to open the NEtO with the viewer profile.
Choose Default NEtO launch to open the NEtO with the null profile.
Note — If the option to run TACACS+ in the network is enabled, choose
the Default NEtO launch.
4 — 9500 MPR/9500 MPRe object configuration
September 2013 4-5