9500 Mpr/9500 Mpre Object Configuration; 9500 Mpr/9500 Mpre Object Configuration Overview; Workflow To Configure And Manage 9500 Mpr/9500 Mpre Device Objects; 9500 Mpr/9500 Mpre Device Object Configuration Procedures - Alcatel-Lucent 5620 User Manual

4 — 9500 MPR/9500 MPRe object configuration
4.1

9500 MPR/9500 MPRe object configuration overview

The device object is the discovered device at the top of the hierarchy in the
navigation tree, directly below the network icon.
This chapter contains the procedures to configure 9500 MPR/9500 MPRe device
objects using the navigation tree. Device object properties forms, which are used to
configure specific parameters for discovered devices, are accessed using objects on
the 5620 SAM navigation tree. See the "Navigation tree overview" chapter in the
5620 SAM User Guide.
4.2 Workflow to configure and manage 9500 MPR/9500 MPRe
device objects
The following workflow describes the sequence of high-level tasks required to configure
and manage 9500 MPR/9500 MPRe device objects; see the "Device object
configuration" chapter in the 5620 SAM User Guide for the generic procedures that
apply to this device type. Also, configure the following device-specific tasks and
functions.
1 Configure the system settings for a 9500 MPR/9500 MPRe device; see
Procedure 4-1.
2 Remove any inconsistencies created due to MIB population failures that can occur
during service creation on a 9500 MPR NE; see Procedure 4-2.
3 Start the 9500 MPR external element manager from the 5620 SAM GUI; see
Procedure 4-3.
4 Configure a scope of command role for NEtO access; see Procedure 4-4.
5 As required, review the list of the specific functionality for a 9500 MPR SAM-E
license compared to management functions available in the NEtO. See
Appendix A.
4.3 9500 MPR/9500 MPRe device object configuration
procedures
Use the following procedures to configure devices using the navigation tree.

Procedure 4-1 To configure system settings on a 9500 MPR

1 Right-click on a 9500 MPR device in the navigation tree and choose Properties from
the contextual menu. The Network Element (Edit) form for the device opens with
the General tab displayed.
2 Click on the System Settings tab.
4-2 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide