9500 Mpr/9500 Mpre Shelf Object Configuration Procedures; Procedure 6-1 To Migrate The 9500 Mpre Connected To A 7705 Sar From Standalone Mode To Single Ne Mode - Alcatel-Lucent 5620 User Manual

6 — 9500 MPR/9500 MPRe shelf object configuration
2 As required, configure the card and card slot objects as follows:
a
b
c
3 As required, switch between an in-service protected radio link and a standby
protected radio link for 9500 MPR devices; see Procedures 6-6.
6.5 9500 MPR/9500 MPRe shelf object configuration
procedures
Use the following procedures to configure shelf objects using the navigation tree.
Procedure 6-1 To migrate the 9500 MPRe connected to a 7705 SAR
from standalone mode to single NE mode
The following requirements must be met before you change the 9500 MPRe from
standalone mode to single NE mode:
•
•
•
•
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Choose Network→NE→Shelf, where shelf is the 7705 SAR shelf object.
3 Click on the shelf object to expand the tree view.
6-8
Assign a card type to a chassis slot; see the "Shelf object configuration"
chapter in the 5620 SAM User Guide.
Add 9500 MPR card protection; see Procedure 6-4.
Remove 9500 MPR card protection; see Procedures 6-5.
Ensure that the 7705 SAR is upgraded to Release 6.0 R1 and the 9500 MPRe is
upgraded to Release 4.1.0.
Ensure that the MPT software packages are in the cf3:/images/<Timos.xx.xx>
directory on the 7705 SAR NE.
Ensure that the MWA converted database (*.tar) file is in the cf3:<config file
path> on the 7705 SAR NE.
Ensure that the MPT state is operationally up when it is in standalone mode by
connecting it to the 7705 SAR.
Note 1 — This procedure assumes you have configured a 7705 SAR MW
link and link member before starting this procedure; see the "Shelf
object configuration" chapter in the 5620 SAM User Guide.
Note 2 — If the 9500 MPRe is discovered as a standalone device on the
5620 SAM, then later changed to single NE mode, you must manually
remove the 9500 MPRe node from the database because it shows as
unreachable on the 5620 SAM.
Note 3 — For information about the 7705 SAR and 9500 MPRe, see the
9500 MPRe 4.1.0 user documentation and the appropriate 7705 SAR 6.0
R1 hardware guides.
September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide