9500 Mpr/9500 Mpre Port Configuration Overview; Ima Support; 9500 Mpr Ethernet Port Qos Schemes - Alcatel-Lucent 5620 User Manual

7 — 9500 MPR/9500 MPRe port object configuration
7.1

9500 MPR/9500 MPRe port configuration overview

Port objects are children of card slot objects. Port objects appear below the card slot
after the card is configured. Port objects for 9500 MPR/9500 MPRe devices can be
configured for plug-in cards; there are no daughter cards associated with these
devices. Properties forms for port objects are accessed using the 5620 SAM
navigation tree.
You can configure the following 9500 MPR device ports:
•
Ethernet ports
•
2 × STM card ports
•
1 × STM (Channelized) card port
•
E1 and DS1 ports
•
DS3 ports
•
1 × radio modem ports
•
AUX alarm ports
•
9500 MPRe ports
See the "Port and channel object configuration" chapter in the 5620 SAM User Guide
for more information about working with port objects.

IMA support

For 9500 MPR/9500 MPRe devices, IMA is supported on the 16 × E1 ASAP Access
(ETSI) card. Each IMA group bundle can have up to 16 links and there can be up to
8 IMA groups on a card.
Each ATM interface supports up to 48 VP/VC connection points. Each 16 × E1
ASAP Access (ETSI) board supports up to 128 VP/VC connection points.
An IMA group bundle has the following common interface properties:
•
ATM encapsulation type is displayed in the ATM Interface form by clicking on
the "Edit ATM button".
•
ATM interface characteristics can be viewed by clicking on the "Edit ATM
button" on the Bundle Properties form.
•
Interface mode is access only for the 9500 MPR.
•
MTU value (of the primary link)

9500 MPR Ethernet port QoS schemes

You can configure the following protection schemes on 9500 MPR Ethernet ports:
7-2 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide