Procedure 3-2 To Configure Polling For 9500 Mpr/9500 Mpre; Procedure 3-3 To Enable 5620 Sam Management Of 9500 Mpr/9500 Mpre Devices - Alcatel-Lucent 5620 User Manual

Procedure 3-2 To configure polling for 9500 MPR/9500 MPRe devices
1 Choose Equipment or Routing from the navigation tree view selector. The
managed devices are displayed.
2 Right-click on an icon that represents a 9500 MPR and choose Properties. The
Network Element (Edit) form opens with the General tab displayed.
3 Record the system IP address and the management IP address. Configure
the Location and Current OLC State parameters, if required.
4 Click on the Polling tab.
5 Configure the Scheduled Polling parameter if you are configuring a 9500 MPR.
Scheduled polling is configured using the Mediation configuration form. See the
"Device discovery" chapter in the 5620 SAM User Guide.
6 View the read-only parameters to determine the current polling status:
•
•
•
•
7 Click on the OK button. A dialog box appears.
8 Click on the Yes button to confirm the action. The Network Element (Edit) form
closes.
Procedure 3-3 To enable 5620 SAM management of
9500 MPR/9500 MPRe devices
Perform this procedure to enable the 5620 SAM to manage a 9500 MPR or 9500 MPRe,
and to enable the opening of NEtO sessions using the 5620 SAM GUI.
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
3 — 9500 MPR/9500 MPRe device commissioning and management
Resync Status indicates whether the last poll successfully completed.
Last Resync Start Time and Last Resync End Time indicate the start and finish
of the last poll.
Scheduled Resync Status indicates whether the last scheduled poll successfully
completed.
Last Scheduled Resync Start Time and Last Scheduled Resync End Time
indicate the start and finish of the last scheduled poll.
Note — The NEtO application is installed and configured to open
automatically for newly discovered 9500 MPR NEs. Use this procedure
only to modify properties files of 9500 MPR NE versions that are not
supported in NEtO distribution in Release 10.0 R5.
September 2013 3-9