Smeg Oven General Instructions Manual page 13

Instructions for the user
5.6 Preheating with delayed start
The program with delayed pre-heating is set as follows:
• Turn the knob to the
• Press the "PUSH" button for at least 3 seconds; the display shows the
current hour flashing.
• Turn the knob to the
• Press the "PUSH"
flashing.
• Turn the knob to the
• Press the "PUSH" button; the display will show the temperature flashing.
• Turn the knob to the
• Press the "PUSH" button; the display will show the cooking start hour
flashing.
• Turn the knob to the
• Press the "PUSH"
flashing.
• Turn the knob to the
• Press the "PUSH" button to exit from the data setting and saving
phase. The text "PEnd" appears on the display and after 3 seconds it
will display P39, the temperature and the pre-heating start time in
succession.
• To start the program press the "START" button for at least 2 seconds.
The display will show the current time and "P39A" in succession until
the program is activated at the set time.
The oven will perform preheating at the set time; during this phase the
display shows "P39", the text "InF" and the set temperature in succession;
this will continue until interrupted by the "STOP" button.
The program must be activated every day. To reactivate it set function P39
and press the "START" button for at least 2 seconds.
or symbols to select the program "P39".
or symbols to set the current hour.
button; the display
or symbols to set the minutes.
or symbols to set the temperature.
or symbols to set the preheating start hour.
button; the display
or symbols to set the minutes.
will show the
will show the
minutes
minutes
37