Table of Contents
Advertisement
Installation and connection
Electrical connection
For the installer
Safety precautions
10
The appliance must be connected to the mains by a
licensed expert. The regulations of your electricity
supplier must be observed.
Any damage arising from the appliance being
connected incorrectly will invalidate the guarantee.
An all pole isolating switch must be present on the
installation side with a contact gap of at least 3 mm.
This is not necessary if the appliance is connected by
a plug that is accessible to the user.
Appliances with plugs must only be connected to
properly installed earthed sockets.
Electrical safety: The cooker corresponds to safety
class I and may only be used in conjunction with a
safety earth terminal.
A type H 05 VV F or equal rated lead must be used to
connect the appliance.
Advertisement
Table of Contents
