Table of Contents
Advertisement
Setting procedure
Example: 20 minutes
The time has elapsed
Changing the timer period
1. Press the j clock button.
The timer symbol a will flash.
2. Press the + or - button.
The default value appears.
+ button default value = 10 minutes.
- button default value = 5 minutes.
3. Set the timer period using the + or - button.
The timer starts after a few seconds. The a symbol
lights up in the display. The time counts down visibly.
A signal sounds. Press the j clock button. The
display goes out.
Press the j clock button. Change the time using the
+ or - button.
25
Advertisement
Table of Contents
