De-Registering Handsets; Changing A Handset's Internal Number - Siemens Gigaset CE450 IP R User Manual

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / T-NetBox_SAG-registration.fm / 02.03.2007
Registering other handsets
You can register other Gigaset handsets and handsets for other devices with GAP function-
ality as follows.
Please note:
Other handsets may not support all base station functions.
On the handset
¤
Start to register the handset as described in its user guide.
On the base station
÷

De-registering handsets

You can de-register any registered C45 handset from any registered handset.
§INT§
q
§Menu§
De-register Handset
~
§OK§
a
The handset is de-registered immediately, even if it is not in idle status.

Changing a handset's internal number

A handset is automatically assigned the lowest available number on registration. In the list
of internal subscribers, the handsets are sorted according to their internal number.
You can change the internal number of all registered handsets (1–6). Numbers 1-6 can
only be assigned once each.
§INT§
§Menu§
Edit Handset Number
q
~
§OK§
You will hear the error tone if an internal number has been allocated twice.
¤
Repeat the procedure with a free number.
48
Press and hold (min. 1 sec.) the registration/paging key on the base station
(page 1).
Press the display key. All registered handsets are displayed.
Select the handset to be de-registered.
Press the display key.
Select and press .
§OK§
Enter the base station system PIN (default setting: 0000).
Press the display key to confirm the prompt.
Press and hold (idle status).
Press the display key.
Press the display key.
Select and press .
§OK§
Select handset.
Enter the number (1–6).
Press the display key to complete the operation.
De-registering handsets