Restoring The Handset To The Factory Settings; Setting The Base Station; Changing The System Pin Of The Base Station Phone; Restoring The Base Station To The Factory Settings - Siemens Gigaset CE450 IP R User Manual

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / settings_bs_hs_pabx.fm / 02.03.2007

Restoring the handset to the factory settings

Restoring the handset to the factory settings
Each individual handset setting is reset, in particular the language, display, volume, ringer
and alarm clock settings (see from page 51 onwards). The last number redial list is cleared.
Entries in the directory, the date and time, and the handset's registration to the base
station will be retained.
¢
Settings
§Menu§
§OK§
a
Cancel the reset with a.

Setting the base station

The base station settings are carried out using a registered Gigaset C45 handset.

Changing the system PIN of the base station phone

You will have to enter the system PIN e.g. when you register a handset with the base
station, change the VoIP settings or start the phone Web configurator.
You can change the base station's 4-digit default system PIN ("0000") to a 4-digit PIN
known only to yourself.
¢
Settings
§Menu§
~
~
~
For security reasons, " **** " is displayed instead of the numbers entered.
a

Restoring the base station to the factory settings

The base station's phone and router will be reset.
Please note:
You should carry out the following base station resets before giving your base station to a third party.
This will delete your personal data.
¢ ¢
Handset Reset Handset
Press the display key to confirm.
Press and hold (idle status).
¢ ¢
Base System PIN
Enter the current system PIN and press
Enter your new system PIN and press
Now re-enter the new system PIN and press
Press and hold (idle status).
.
§OK§
.
§OK§
.
§OK§
55