Siemens Gigaset CE450 IP R User Manual page 119

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / appendix.fm / 02.03.2007
Status Meaning
code
0x416 URI is faulty.
0x420 Wrong ending.
0x421 Wrong ending.
0x423 The requested service is not supported by the VoIP provider.
0x480 The dialled number is temporarily unavailable.
0x481 The recipient is not available.
0x482 Double service query.
0x483 Too many "hops":
The query was rejected because the service server (proxy) has decided that this query has
already run through too many service servers. The maximum number was previously spec-
ified by the original sender of the query.
0x484 Wrong number:
In most cases this response means that you have simply omitted one or more digits in the
phone number.
0x485 The URI dialled is not unique and cannot be processed by the VoIP provider.
0x486 The called party is busy.
0x487 General faults:
The call was interrupted before a call was established. The status code confirms receipt of
the interruption signal.
0x488 The server cannot process the query because the data entered in the media description is
not compatible.
0x491 The server notifies that the query will be processed as soon as a previous query has been
completed.
0x493 The server rejects the query because the phone cannot decrypt the message. The sender
has used an encryption method that neither the server nor the receiver phone can decrypt.
0x500 The proxy or the receiving device has discovered a fault while executing the query, which
makes further execution of the query impossible. In this case, the caller or the phone dis-
plays the fault and repeats the query after a few seconds. The number of seconds after
which the query can be repeated may be transmitted to the caller or to the phone by the
receiving device.
0x501 The query cannot be processed by the recipient because the recipient does not have the
functionality that the caller requires. If the recipient understands the query but does not
process it because the sender does not have the necessary rights or the query is not permit-
ted in the current context, a 405 is sent instead of 501.
0x502 In this case, the receiving device that transmits this error code is a proxy or a gateway and
has received an invalid response from its gateway via which this query is to be processed.
0x503 The query cannot currently be processed by the receiving device or the proxy because the
server is either overloaded or is being serviced. If it is possible for the query to be repeated
in the foreseeable future, the server informs the caller or the phone of this.
0x504 Time limit exceeded at the gateway.
116
Questions and answers