Phone Web Configurator; Connecting The Pc To The Phone Web Configurator - Siemens Gigaset CE450 IP R User Manual

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / web_server.fm / 02.03.2007

Phone Web configurator

You can make the following settings using the phone Web configurator:
u
Connecting your base station phone to the local network (page 86)
u
Configuring for the telephony
– Make VoIP provider settings (page 89)
– Configure VoIP accounts
– Activate/deactivate the Gigaset.net connection
– Make settings to improve voice quality for the VoIP connections
– Assign VoIP phone numbers to the individual handsets
u
Setting for the automatic area code (page 102)
u
Type of DTMF signalling (for remote operation of a network mailbox)
u
Data server for downloading updates of phone firmware (page 105)
u
Displaying VoIP status messages on your handset (page 106)

Connecting the PC to the phone Web configurator

Precondition: The settings of an available PC firewall allow the PC and base station to com-
municate with each other.
¤
Launch the Web browser on your PC.
¤
In the Web browser address field, enter the IP address of the base station phone,for
example
http://192.168.1.150, or http://telephony.gigaset.
You can check the phone's current IP address on the handset (page 59).
If you have activated the dynamic allocation of IP addresses (DHCP) on the router
(page 79) and on the phone (page 86), your phone's IP address can change each time
the router is rebooted.
¤
Press the return key.
A connection is established to the Web configurator for the base station phone or the base
station router.
84
Connecting the PC to the phone Web configurator