Changing The Name Of A Handset; Locating A Handset ("Paging"); Making Internal Calls - Siemens Gigaset CE450 IP R User Manual

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / T-NetBox_SAG-registration.fm / 02.03.2007

Changing the name of a handset

Changing the name of a handset
The names "INT 1", "INT 2" etc. are assigned automatically at registration. You can change
these names. The changed name is displayed in every handset's list.
§INT§
q
§Menu§
Change Handset Name
~

Locating a handset ("paging")

You can locate your handset using the base station.
¤
Press the registration/paging key on the base station (page 1) briefly.
¤
All handsets will ring simultaneously ("paging"), even if the ringer tones are switched
off.
Ending paging
÷ / c

Making internal calls

Internal calls to other handsets registered on the same base station are free.
Calling a specific handset
§INT§
q c
Or:
~
Calling all handsets ("group call")
§INT§
P
Or:
c
Call All
Ending a call
a
Please note:
You can reject an internal call by pressing the end call key a.
Press the display key.
Select handset.
Press the display key.
Select and press .
§OK§
Enter name (max. 10 characters) and press
Briefly press the registration/paging key on the base station (page 1) or press
the talk key on the handset.
Press the display key.
Select handset and press the talk key.
Enter the number of the handset.
Press the display key.
Press the star key.
Select and press the talk key.
Press the end call key.
.
§OK§
49