Using Multiple Handsets; Registering Handsets; De-Registering Handsets; Locating A Handset ("Paging") - Siemens Gigaset C385 Instruction Manual

Using multiple handsets

Using multiple handsets

Registering handsets

You can register up to four handsets to
your base station.
Please note
Each additional handset must be regis-
tered on the base station in order for it
to work properly!
For how to register your handset automat-
¢
ically, page 13.
If automatic registration does not work,
you must register the handset manually.
Manually registrating the handset to
C385
You must activate manual registration of
the handset to both the handset and the
base station.
Once it has been registered, the handset
returns to idle status. The handset's inter-
nal number is shown in the display
(e.g. INT 1). If it does not appear, repeat
the procedure.
On the handset
¢ ¢
Settings
§Menu§
¢
Register Handset
~
Enter the system PIN of the
base station (the default is
0000) and press
registering
play.
On the base station
Within 60 sec., press and hold the Regis-
tration/Paging key on the base station
¢
page 2) (approx. 3 seconds).
(
When the registration is successful, the
handset displays the message
istered.
38
Handset
.
Handset is
§OK§
flashes on the dis-
Handset reg-
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows:
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
Press and hold the Registration/Paging key
on the base station (
(approx. 3 seconds).

De-registering handsets

Handsets can only be de-registered by
resetting the base station to its default set-
tings. This will also reset every other
¢
setting page 43.

Locating a handset ("paging")

You can locate your handset using the
base station.
¤
Briefly press the Registration/Paging
key on the base station (
¤
All handsets will ring simultaneously
("paging"), even if the ringer melodies
are deactivated.
Ending paging
¤
Briefly press the Registration/Paging
key on the base station or press the
Talk key c on the handset.
¢
page 2)
¢
page 2).