Changing Bulbs (Only For Vehicles With Halogen Headlamps) - Mercedes-Benz A-Class Owner's Manual

Hide thumbs Also See for A-Class:
Table of Contents

Advertisement

128 Light and sight
Adjusting the brightness
Select Brightness.
#
Adjust the brightness.
Activating the brightness for zones
Select Brightness.
#
Select
Brightness
zones.
#
Activate or deactivate the function.
#
The EMPHASIS,
AMBIENT
and
can be set separately.
Activating multi-coloured lighting
Select Colour.
#
Select Multi-colour.
#
There are ten preset colour combinations
available.
Select a colour combination.
#
Activating multi-coloured animation
Select Colour.
#
Select
Multi-colour
animat..
#
The chosen colour combination changes at
predefined intervals.
Activating welcome lighting
Select Colour.
#
Select Welcome.
#
When the vehicle is unlocked, a special ambi‐
ent lighting sequence runs.
Activating dependency on air conditioning
settings
Select Colour.
#
VENTS
zones
Select Climate.
#
If changes are made to the temperature set‐
ting in the vehicle, the colour of the ambient
lighting changes briefly.
Switching the interior lighting switch-off
delay time on or off
Multimedia system:
©
Settings
Lights
,
.
.
del. shut-off
Switch the lighting switch-off delay time on
#
or off.
When this function is active, the interior light‐
ing lights up again briefly after the vehicle
has been locked.
Changing bulbs (only for vehicles with halo‐
gen headlamps)
Notes on changing bulbs
& WARNING Risk of burns from hot com‐
ponent parts whilst replacing a bulb
Bulbs, lamps and plugs can become very hot
during operation.
When replacing a bulb, you could burn your‐
self on these component parts.
Int. light.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents