Copying A Sequence - Yamaha Electone Stagea ELS-01 Owner's Manual

To start a sequence using the Left Footswitch:
You can start or stop the Rhythm Sequence playback using the left footswitch.
1
Press the desired Sequence buttons, making sure that all their
LEDs are lit.
2
Press the [FOOT SWITCH] button on the panel to call up the
Footswitch display, LEFT Page.
3
Set the control mode of the Footswitch to RHYTHM STOP.
(See page 185 for information about the Footswitch settings.)
4
Press the Left Footswitch with your right foot to turn the
sequence on.
Pressing the Left Footswitch again in the middle of the sequence playback
cancels the Rhythm Sequence.
When you are playing a Rhythm Sequence that is made up of several sequences
(SEQ. buttons), pressing the Left footswitch turns off the currently playing
Rhythm Sequence, and pressing it again starts the next sequence.

Copying a Sequence

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can copy a rhythm sequence stored on a sequence button to another button. You
can also add a rhythm sequence to the end of another rhythm sequence.
1
Press the EDIT [COPY] or [ADD] button in the Sequence Menu
page.
The Copy From or Add From Display appears.
2
Select the number of the desired rhythm sequence program to
which you want to copy or to which you want to add.
A message appears prompting confirmation of operation.
3
Press the [COPY] or [ADD] button to copy or add the rhythm
sequence.
Press [CANCEL] to abort the operation.
4
If necessary, edit the sequence.
Refer to the section "Editing an Existing Rhythm Sequence" on page 177 and/or
"Editing an Existing Registration Sequence" on page 181.
NOTE
If you add a rhythm
sequence to another rhythm
sequence that has an
ending at the end, the
section will automatically
change to MAIN A and the
new sequence will be
added after the MAIN A
part.
ELS-01/01C Owner's Manual
9
183