Entering Percussion Sounds To A Rhythm Pattern - Step Write - Yamaha Electone Stagea ELS-01 Owner's Manual

NOTE
The volume of the percussion
and accompaniment sound
during use of Rhythm Pattern
Program can be controlled
with the VOLUME button of
the RHYTHM section. When
you quit Rhythm Pattern
Program, the VOLUME of the
RHYTHM section will return
to the previous selected
level.
9
150 ELS-01/01C Owner's Manual
Entering Percussion Sounds to a Rhythm Pattern – Step Write
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can enter percussion sounds in the INPUT Page of the display. Before entering
percussion sounds, turn off the Upper and Lower keyboard Voices by setting each
Voice's volume to MIN.
1
Press the [INPUT] button at the top of the display to call up the
INPUT Page.
2
Select the part, MAIN DRUM or ADD DRUM, to which you want to
enter the percussion.
In general, main (or basic) drum/percussion instruments (such as Bass Drum,
Snare Drum, and so on) are entered in Main Drum part and others (such as
Tambourine, Triangle) are entered in Add Drum part.
3
Select the desired Drum Kit.
You can select a kit from 20 Drum kits and 5 SFX kits. For details on each kit,
see page 171. Pressing the button indicating the currently selected kit calls up
the kit Select the pop-up menu, then select the desired kit from the pop-up
menu. The selected kit is called up on the Upper and Lower keyboards.
You can select only one kit for each part (Main Drum or Add Drum). When you
want to create a rhythm pattern including two different drum kits, select one kit
for Main Drum and another for Add Drum.
Drum kit SFX kit