Yamaha Electone Stagea ELS-01 Owner's Manual page 113

Next Regist (Registration) Settings (Changing the order
of the Registration data)
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
When playing back a song which uses more than 16 Registration numbers, you can use
two or more Registration banks saved in a single song and recall them one by one as
you play the song. This function is called Next Regist (Registration).
M1
If you want to use the Next Regist (Registration) function, you'll have to make one of
the following settings in advance:
• Set the Registration Shift mode to User, and select Next Regist (Registration) as the
Shift End, in advance.
• Enter the Next Regist (Registration) data in the Registration Sequence.
1
Save the desired Registrations to a song.
For instructions on saving two or more Registration banks to a song, see page
111.
2
Select the song containing the Registrations for which you want
to change the order.
For details on selecting a song, see page 103.
3
Press the [REGIST EDIT] button in the SONG Page to call up the
Regist (Registration) Edit Display.
4
Change the Registration order, in the order you want to recall.
First select the specific Registration bank you want to edit, then move, copy or
delete the selected data as needed to change the order.
M16 M1
REG_001 REG_002
M16
NOTE
If the next Registration data
contains User voices and/or
VA custom voices, the
Electone may produce no
sound for a few seconds
while the Registration is
being loaded.
NOTE
If the Next Regist
(Registration) function is
used while the rhythm is
being played back, the
sequence data and User
rhythm will not change.
ELS-01/01C Owner's Manual
7
113