Controlling The Electone From An External Device; Connecting Usb Storage Devices Or Usb-Lan Adapter - Yamaha Electone Stagea ELS-01 Owner's Manual

NOTE
When you are using the
M.D.R., MIDI data cannot be
received.
Reference Pages
Installing the Floppy Disk
Drive (page 224)
Internet Direct Connection
(page 194)
Formatting External Media
(page 102)
NOTE
If necessary, use a USB hub.
Only self-powered (battery or
external power supply) types
can be used. Up to two USB
hubs can be used.
13
216 ELS-01/01C Owner's Manual

Controlling the Electone from an External Device

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can use an external MIDI keyboard or sequencer to remotely play the sounds of
your Electone and change its Registrations. (You will need to set the MIDI transmit
channels of the MIDI keyboard to match the fixed receive channels on your Electone.)

Connecting USB storage devices or USB-LAN adapter

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Using the USB TO DEVICE terminal(s), you can connect USB storage devices (such
as the USB flash memory or UD-FD01 floppy disk drive) for saving your Electone
data, and/or a USB-LAN adapter for direct connection to the Internet.
When you use USB devices, refer to "Precautions when using the USB TO DEVICE
terminal" on page 100.
MIDI keyboard or synthesizer
MIDI IN MIDI OUT
MIDI cable
MIDI messages
MUSIC PRODUCTION SYNTHESIZER