Playing Back A Song; Registration Data - Yamaha Electone Stagea ELS-01 Owner's Manual

9

Playing Back a Song

The M.D.R. enables you to play back commercially available XG-compatible song data
and MIDI data created with a computer as well as songs recorded on the Electone itself.
1
Select the song to be played back.
For details on selecting a song, see page 103.
2
Press the [F] (Play) button in the display to load the

Registration data.

An hourglass icon appears, indicating the Registration data is loading.
If the song contains more than two Registration banks, the first one will be
loaded. You can check the Registration order in the Regist (Registration) Edit
Display.
If the song contains no performance data, after loading the Registration data, the
LCD returns to the SONG Page.
3
Playback starts automatically after reading the Registration data
(the elapsed time is shown).
In general, all parts recorded to the song are played back; however, you can mute
specific parts and playback only selected parts. For more information, see page
118.
When the end of the recorded performance is reached, playback automatically
stops. You can, however, stop playback in the middle of the song by pressing the
[J] (Stop) button in the display.
Custom Play
If you want to play back the song without resetting the Registrations, press the
[CUSTOM PLAY] button instead of the [F] (Play) button. This displays the
song time and starts playback immediately.
When you play the song using the Next Regist function, always press the [F]
(Play) button to start the song, not the [CUSTOM PLAY] button.
Reference Page
Next Regist Settings
(Changing the order of the
Registration data) (page
113)
Reference Page
About the [SETTINGS]
button (page 104)
ELS-01/01C Owner's Manual
7
117