Yamaha Electone Stagea ELS-01 Owner's Manual page 176

NOTE
When entering an Intro
section, check the number of
bars at the top of the display.
NOTE
When you press the ENDING
[1] button while the Main
section is playing back, a fill-
in pattern will be called up
before the Ending 1 pattern.
In the Rhythm Sequence
program, however, a fill in
pattern is not called up when
Ending 1 is entered to the
Sequence.
9
176 ELS-01/01C Owner's Manual
3
Select the desired rhythm from the displayed rhythm menu.
4
Select a rhythm section (Main A – D, Fill in A – D, Intro 1 – 3,
Ending 1 – 3, or Break) by pressing one of the rhythm control
buttons on the panel.
The selected rhythm and section appears at the top of the display.
5
Press the [SET] button in the display.
One bar of the selected rhythm is entered and its name is displayed as a box in
the rhythm row on the display. When the rhythm is entered, the cursor (colored
orange) will automatically move to one step right. A maximum of 140 bars can
be entered to a single sequence. When you select an ending pattern and press the
[SET] button, an entire ending pattern (more than one bar) is entered.
You cannot enter a rhythm after an ending pattern.
6
Repeat steps 2 through 5 above to enter the rhythm and create
your own rhythm composition.
Turning the power off before quitting or closing the Rhythm Sequence Program erases
any sequences you have made. Before turning the power off, quit the Rhythm Sequence
Program (page 181).