Yamaha Electone Stagea ELS-01 Owner's Manual page 242

Problem
When selecting a User button Voice or rhythm, the
Voice or rhythm title at the top of the LCD does not
match the selected Voice or rhythm.
When keys are pressed, the sounds of percussion
instruments are also heard.
Even though a User button's rhythm has been
selected and started, the pattern does not sound.
EFFECTS
The Touch Tone function does not operate.
The Reverb effect is not applied to the desired Voice
sections, even when the REVERB button setting on
the panel is increased.
The Rotary Speaker effect cannot be heard, even
when the [ROTARY SP SPEED] button in the DISPLAY
SELECT section is on.
ACCOMPANIMENT
The pitch in the Single Finger mode does not change,
even when pressing different keys of the keyboard.
While an Intro/Ending pattern is automatically playing,
the Lower keyboard does not produce any sound,
even when the keys are played.
The Accompaniment cannot be heard even when an
appropriate Accompaniment type is selected and the
rhythm has been started.
The harmony notes of the Melody On Chord function
cannot be heard.
The bass phrase of the Auto Bass Cord cannot be
heard.
REGISTRATION MEMORY
Certain functions have not been memorized to
Registration Memory.
VOICE EDITING
The Voice Edit display cannot be called up even when
the [VOICE EDIT] button is pressed.
During Voice editing, the specified Voice isn't heard,
even when the keyboard is played.
An error message appears while the Voice name is
entered.
RHYTHM PROGRAM
During use of the Rhythm Pattern Program, no sound
is produced even when you play a certain percussion
sound.
14
242 ELS-01/01C Owner's Manual
Possible Cause and Solution
The currently assigned Voice or rhythm is displayed at the top of the LCD, and
remains until another Voice or rhythm has been selected.
The Keyboard Percussion function has been turned on. When not using the
function, be sure to turn it off (page 65).
Since the User buttons contain User rhythms, no rhythm will sound if a pattern
has not been saved to the selected User button.
Adjust the Touch Tone settings in the Voice Condition display (page 39).
Increase the Reverb depth for the desired Voice sections in Reverb Display
Pages 2 – 4.
Rotary Speaker must be selected first in Voice Condition display Pages 3 and/
or 4 (for panel Voices), or in the Organ Flute Voices ATTACK/VOLUME Page
(for Organ Flute Voices).
Single Finger mode will only produce notes when played within a fixed octave
interval on the Lower keyboard. If notes with the same letter name are pressed
outside of that range, the chords that are sounded will share the same pitch.
Since the Accompaniment chords play automatically one after another, the
Lower keyboard is designed not to produce any sound during the playback of
an Intro/Ending pattern.
• The Accompaniment volume may have been set to 0. Be sure to raise the
Accompaniment volume in the Rhythm Condition display (page 62).
• All Accompaniment parts may be set to off (mute). Set the desired part on
(page 61).
The Upper keyboard has been set to sound only Lead Voices. Increase the
volume of the Upper Keyboard Voices.
The pedal polyphonic mode may be set to on. Turn it off in the Voice Condition
display (page 40).
Some functions cannot be memorized. Refer to page 81.
The Voice Edit display cannot called up by pressing only the [VOICE EDIT]
button. While holding down the [VOICE EDIT] button, press the desired Voice
button.
• The Element is turned to mute or its level is set to minimum. Turn it to on or
increase the volume.
• You may have played keys outside the range of Note Limit. Play only keys
within the Note Limit range.
Voice name capacity is 16 characters. Delete the unnecessary letters or
spaces.
If percussion sounds have been recorded while memory is full, no
subsequently selected instruments can be heard or recorded. If necessary,
erase some of the less necessary percussion sounds and play again.