Detailed Settings For Each Percussion Instrument - Yamaha Electone Stagea ELS-01 Owner's Manual

5
74 ELS-01/01C Owner's Manual

Detailed settings for each percussion instrument

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can independently adjust the settings of pan, pitch, reverb and volume for each
instrument. The settings here are system settings that cannot be memorized to
Registration memory.
1
Turn off the volume of the relevant keyboard (the keyboard to
which the instrument to be changed is assigned).
2
Press the [SETUP] button at the top right of the K.B.P. display to
call up the SETUP Page.
3
Press the appropriate key (the key to which the instrument to be
changed is assigned).
The selected instrument's name is shown on the display and you can change its
settings.
The name of the
selected instrument
1
PAN
Determines the position of the currently selected instrument in the stereo image. Seven
pan positions are available.
2
PITCH COARSE
Adjusts the pitch of the currently selected instrument by 100 cents.
Range: -64 – +63
3
PITCH FINE
Adjusts the pitch of the currently selected instrument by one cent, allowing more
detailed tuning of the instrument than PITCH COARSE (
Range: -64 – +63
4
REVERB
Determines the amount of reverb applied to the currently selected instrument.
Range: 0 – 24
5
VOLUME
Determines the volume of the currently selected instrument.
Range: 0 – 24
1
2 3 4 5 6
2
).