Yamaha Electone Stagea ELS-01 Owner's Manual page 71

6
Assign an instrument to a particular key or pedal by
simultaneously holding down the desired instrument name in the
display and pressing the key (or pedal) to which the instrument is
to be assigned.
The key to which the instrument is to be assigned
Instrument Name
When the assignment is complete, the key name and instrument name is
displayed at the top of the display. The assignments are saved to the User
memory selected in Step 2 (in this example, User 1).
7
Repeat the operation steps above as necessary to construct your
own User Keyboard Percussion set.
To erase one instrument:
Simultaneously hold down the [CLEAR] button in the display (ASSIGN Page) and
press the key (or pedal) corresponding to the instrument you wish to erase.
The Keyboard Percussion setting you have created is automatically saved
when you switch to another display. While data is being saved, the square at
the top left of the display turns light blue for a few seconds. Do not turn the
power off while the Keyboard Percussion settings are being saved.
Hold down the Instrument name...
NOTE
Though eight User Keyboard
Percussion setups can be
created, they cannot be
memorized to Registration
Memory. Only on/off data and
the Keyboard Percussion
Menu are memorized to
Registration Memory.
Press the key.
ELS-01/01C Owner's Manual
5
71