Creating A Network (Ethernet) Connection - Vadem Clio C-1050 Series User Manual

devices/PCs to Clio.
Optionally, select configuration and TCP/IP settings, then
7.
tap Next.
You should not need to change any settings in the Configura-
tion or TCP/IP Settings dialog boxes.
Enter your access phone number and tap Finish.
8.
Once created, the dial-up connection is available anytime. To
use it, double-tap its icon, enter your user name and password,
then tap Connect. Once connected, you can use Pocket Inter-
net Explorer to visit Web pages or Inbox to send and receive e-
mail.

Creating a Network (Ethernet) Connection

You do not need to create a new connection in Remote
Networking on your device for a network connection. Instead,
you must install and configure an Ethernet card. The drivers for
the card may already exist on your device.
To create a network (Ethernet) connection:
Insert the Ethernet card into your device and connect it to
1.
your network cable.
Note: For a list of supported cards, refer to Appendix D,
"Supported PC Cards."
If you have an A/C Adapter, plug it into your device.
2.
Ethernet PC Cards consume a significant amount of power.
In the Settings dialog box, enter the information for your
3.
server.
Tap Start > Settings > Control Panel, then double-tap Net-
work:
Clio User Manual
Connecting to a Network
3-5