PRIOR EXECUTION BY THE RECIPIENT OF A NONDISCLOSURE AGREEMENT APPROVED BY VADEM GENERAL COUNSEL. The information contained in this document is confidential and the sole property of Vadem. Written permission must be obtained to reprint or use any of this information.
Items you must type appear in standard Courier font, for example: cd\letters\business\legal [ENTER] The information contained in this document is confidential and the sole property of Vadem. Written permission must be obtained to reprint or use any of this information.
1.17.1.1. Power ON considerations in Tablet to Laptop mode..............1-15 1.17.1.2. Control Panel Support ......................1-15 The information contained in this document is confidential and the sole property of Vadem. Written permission must be obtained to reprint or use any of this information.
Page 5
................5-3 ATTERY EMOVE AND EFIT The information contained in this document is confidential and the sole property of Vadem. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 6
................. 5-17 ETAL EMOVE EFIT The information contained in this document is confidential and the sole property of Vadem. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 7
Material Required ........................6-1 6.1.2. Procedure..........................6-1 The information contained in this document is confidential and the sole property of Vadem. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Vadem management. viii The information contained in this document is confidential and the sole property of Vadem. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
L C D L C D P o w e r 1.2. The CLIO uses the VR4111 MIPS CPU running at various speeds depending on how it is configured. Refer to the following table: CLKSEL [2 . . 0] CPU Core Freq.
CLIO contains two memory modules: one each ROM and RAM. 1.3.1. CLIO supports a single custom ROM module which can house 24MB or 32MB of Mask ROM or 8MB or 16MB of Flash ROM. The ROM module mounts on the main board in a user- friendly fashion, and is distinguishable from the RAM module due to its offset connectors.
PC C (PCMCIA) CLIO supports one PC Card Type I or Type II card. The PC Card slot supports Off, 3.3 and 5V for Vcc and Off. CLIO only supports ATA Flash cards, since support is not included for 12V. The PC Card slot supports the following memory cards: SRAM Card: These use the DOS FAT file system, and are limited to 64Mb maximum.
1.7. EEPROM CLIO contains a 2K serial EEPROM. This is an internal feature used by Vadem engineering to store system and user data. Data stored in the EEPROM is not accessible by any software application unless the application has been developed by or in partnership with Vadem engineering.
Page 13
0 0 0 0 1 0 0 0 F F F F The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 14
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Calibration occurs during the initial setup after a full reset of the CLIO unit. The user can re- calibrate at any time by using the Stylus control panel or by pressing [CTRL] + [ALT] + [ =].
Microsoft Windows Logo Key License Agreement. For pre-Jupiter CLIO shipments, this key may be assigned to be the FN key. The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
App Specific App Specific Specific The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
[ALT] key and the chording combinations. 1-10 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
1.12. OWER CLIO is designed to be the ultimate in portability. Thus, long battery life is key. CLIO can run continuously for 12-16 hours between charges of its rechargeable main battery pack and can run/charge via an AC Adapter. This provides the typical user with several days’ use between charges.
HARGING NDICATOR CLIO has an LED to indicate battery charging, and battery charged. The LED is located in the front of the unit so that it is visible whether the unit is open or closed. The Charging Indicator has two color states: Green and Orange. It is housed within the Notification Switch (see section 1.20.1) so that the user can press the switch to turn off the low battery warning.
1.14. IBERNATE If the user enables this feature in the Power Manager Control Panel applet, the CLIO unit will automatically enter hibernate mode whenever the case is closed and the screen is hidden (e.g. not in tablet mode). Other on/off options can be configured in the Power control panel.
The cover-closed switch indicates whether the portion of the case containing the LCD panel (referred to here as the cover or lid) is in a closed or open position. Due to the CLIO’s unique hinge design, the lid can be closed such that the face of the LCD is against the keyboard as in a traditional laptop computer or flipped over so the LCD panel is exposed on the outside of the case (Tablet mode).
Tablet Mode to Laptop Mode. Implementation of this feature requires some special support in the driver. In the CLIO hardware, the Cover Closed Switch is tied to a Vr4111 power event pin; the act of lifting the cover from tablet mode sets a power-on interrupt, which the Vr4111 services. If power was OFF to the CLIO and the user had selected the Manual option for the Tablet Power Option (see section 1.16.2), then the power should remain OFF.
OCKING ONNECTOR CLIO has a standard RS232 serial port used for standard serial peripherals and by the dock accessories. The port is mapped to the Vr4111’s COM1 and accessed via a slim serial connector or the CLIO Travel Dock or Desk Dock. The user can adapt the custom connector to a standard DB9 connector via an adapter cable or one of the dock accessories.
IR software supports only lower speeds. 1.19.1. FIR W INDOW A window is provided for the FIR module, located on the side of the CLIO unit. 1.20. OTIFICATION The CLIO unit can notify the user about important events like alarms, appointments, and reminders through a notification LED.
The notification switch is used to turn off audible alarms as well as extinguish the LED indicator. The notification switch is a momentary push-button switch and must be accessible when the lid of the CLIO is closed. The switch will be located on the front of the unit. 1.20.2.
PC C XPANSION CLIO supports one PC Card type II card. The PC Card connector and slot are mounted on the side of the CLIO. The PC Card slot supports 3.3V and 5V cards and provides up to 350mA peak power at 5V.
Page 28
PC Card Modem (XJ2288) 1-20 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 29
SanDisk CompactFlash Memory 1-21 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
The NEC VR4111 contains an integrated real-time clock. 1-22 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
BATTERY photo 1 – Battery Removal The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 32
2 – ROM/RAM Door Removal photo 3 - ROM/RAM Modules The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 33
CLIO Photographs photo 4 – Left Hinge Arm Disassembly The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 34
CLIO Photographs photo 5 - Right Arm Disassembly The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 35
6 – Hinge Arms photo 7 - Lower Hinge & Bracket The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 36
CLIO Photographs photo 8 - Bottom Exterior The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 37
9 - Keyboard Bottom Screws & misc. photo 10 - Lower Keyboard Housing Feet The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 38
11 – Foot Support photo 12 – Lower Housing Removed The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 39
13 – Notification PWB & Cable photo 14 - Inside Keyboard Lower Housing The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 40
15 - Speaker Detail 2-10 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 41
16 – Keyboard Housings 2-11 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 42
18 – Motherboard Switches 2-12 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 43
20 - Reed Switches 2-13 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 44
22- Flex Circuit 2-14 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 45
23 - LCD Assembly 2-15 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 46
24 – LCD Screen Assembly w/Hinge 2-16 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 47
25 - Inverter PWB Assembly w/Microphone 2-17 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 48
26 - Inverter PWB Parts 2-18 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 49
27 - LCD Plastics 2-19 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Page 50
29 - Display Bumpers, Scratch Protectors 2-20 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Quan.: quantity of each part included in the given spare parts kit list The list of kits begins on the next page. The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 52
SK, FLEX CABLE ASSY. 116- CABLE, 000525- FLEX ASSY. 660-000746-01 SK, SCREW M2.0X6.0 PHILLIPS The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 53
000129 TABLET FLEX CIRCUIT GASKET 201- CLAMP, 000133 UPPER TOUCH TABLET CIRCUIT The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 54
200- COSMETIC 000015 PLUG, FRONT LEFT 660-000754-01 SK, COSMETIC PLUG, RIGHT REAR The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 55
SK, NOTIFICATION BUTTON 200- NOTIFICATI 000122 ON BUTTON 660-000766-01 SK, DISPLAY BUMPER The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 56
000268 M3.0X6.0 PHILLIPS SLOTTED COMBINATI PANHEAD, BLACK ZINC 660-000774-01 SK, SCREW, K2.2X7.0 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 57
660-000781-01 SK, BASE, ENCLOSURE BOTTOM 200- BASE, 000001- ENCLOSUR E BOTTOM, CLIO The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 58
2.54 PITCH 5 CONDUCTO RS, LENGTH 100MM 660-000791-01 SK, ASSY., PCB DRAM 16MB. The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 59
SWITCH, 000002 TACT MOMENT. NORMAL OPEN, J TYPE 660-000799-01 SK, SWITCH, DETECTOR The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 60
PHONE, CABLE, VADEM 116- CABLE, 000261 PHONE, 6’, RJ-11 TO RJ-11 3-10 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 61
SCRATCH 000496- PROTECTO 660-0001134- SPACER SUPPORT, LCD 200- SPACER 001120- SUPPORT, 3-11 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 62
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
CLIO Service Manual CLIO Diagnostics CLIO D IAGNOSTICS This chapter details diagnostic procedures to be followed when a CLIO unit is returned for service due to a specific complaint. Each procedure is laid out as a flow chart. 4.1. CLIO P –...
Replace Backlight Inverter Fixed? The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Fixed? NOTE: It is possible that a very few initial Clio units may not boot up when first turned on or after both batteries have been fully discharged. The problem randomly affects approximately 3% of early production units and occurs when the user attempts the initial power on and/or when the main battery and the backup battery are BOTH Adjust LCD brightness &...
Reset Unit Fixed? Unit The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Fixed? Replace Main PWB The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Components as appropriate The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Components as appropriate The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Fixed? Replace Main PWB The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Fixed? Replace Main PWB The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Replace Main PWB 4-10 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Replace Main PWB 4-11 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Replace Main PWB Unit 4-12 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Fixed? Unit Unit 4-13 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Fixed? Unit Unit 4-14 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Replace RAM PWB 4-15 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Replace RAM PWB 4-16 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Replace Indicator PWB Damage? wires 4-17 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Replace backlight flex wires Screen flickering? 4-18 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Go To Final Test Procedure 4-19 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Go To Final Test Procedure 4-20 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
4-21 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Go To Final Test Procedure 4-22 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Fixed? 4-23 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Unit repaired. 4-24 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
EPLACEMENT NITS Refer to Chapter 2 for a set of photographs of a disassembled CLIO with numbered call outs to each listed spare part. Chapter 3 contains a tabulated listing of the spare parts kits available for CLIO as well as their contents. For clarity, all numbered references refer to numbered call outs in the photographs.
Where possible, always link the CLIO unit being worked on to a host PC and backup the CLIO data to the host PC before performing any service on the CLIO unit. This may be done using a serial connection between CLIO’s serial port and a free COM port on the host PC.
Insert the tabs on the curved (front) side of the Battery Door (48) into the slots on the main CLIO unit. Press down on the flat side to snap the cover into place. Note that the CLIO unit will not power on unless the Battery Door (48) is properly inserted.
Remove the six Torx head screws (38) using a #6 Torx head screwdriver. Locate the Phillips screw (37) on the lower left corner. Note the flex circuit (8) and wires coming out of the right side of the CLIO. These are fragile. Handle with care.
Keyboard Base Top (47). Insert the two rubber bumpers (32) in their slots on the left and right edges of the CLIO. Insert the Indicator Lens (29) into its slot in the middle of the CLIO’s front edge (the side facing away from you).
Unit (51, 52) from its slot by lifting it straight up. The Indicator PWB Unit (51, 52) is the small PWB located in the center of the CLIO’s front side (facing away from you) with the insulator attached to the back side of the board. Take care not to bend or break the delicate soldered connection between the Indicator PWB Unit (51, 52) and the ribbon cable (53) connected to it.
Using either a flat headed jewelry screwdriver or the tip of an X-Acto blade, gently remove the four rubber plugs (19, 20, 21, 22)(located on the CLIO hinge arms by inserting the implement between the caps and the hinge and carefully prying the plugs loose.
CLIO Service Manual CLIO Tear-down & Rebuild Lift the U-shaped Metal Arm straight up (27) and away from the CLIO unit and store in a safe location. You may need to use a miniature screwdriver to gently pry the Top Hinge (16) from its position on the hinge arm (27).
Ensure the CLIO unit is oriented properly (keyboard facing up and away from the technician). Place a piece of soft cloth on top of the CLIO Keyboard Top (47) to avoid scratching or marring the LCD Unit (66) or Display Bezel (2).
Un-solder the Indicator PWB cable (53) from the Main PWB Unit (51, 52). 5-10 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Store in a secure location. 5-11 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Inverter PWB Unit (11) in a secure location. 5-12 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Please refer to photos 4, 7, 9, 12, in Chapter 2. 5-13 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Please refer to photos 14, 15 in Chapter 2. 5-14 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
EYBOARD SSEMBLY EMOVAL Insert a piece of soft cloth between the CLIO Keyboard Top (47) and the LCD Assembly to avoid scratching or marring the LCD Unit/Assembly. Follow the Keyboard Base Bottom removal procedure, above. Using tweezers or a pair of miniature needle-nose pliers, gently grasp the Indicator PWB Unit (51, 52) and lift it straight up out of its slot.
Follow the Indicator PWB Unit refit procedure, above. 5-16 The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...
Using either a flat headed jewelry screwdriver or the tip of an X-Acto blade, gently remove the four rubber plugs (19, 20, 21, 22) located on the CLIO Lower Arms (25, 26) by inserting the implement between the caps and the hinge and carefully prying the caps loose.
Page 104
With the CLIO unit in standard orientation, turn it upside-down if not already positioned properly. Lower the U shaped Metal Arm (27) straight down into position against the CLIO unit. Turn the CLIO unit right side up (standard orientation). Follow the Bottom Hinge refit procedure, above.
Page 105
3. Push down firmly on the LCD Support to secure it in place. The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information.
Page 106
LCD Support placement This concludes this procedure. The information contained in this document is confidential and the sole property of Vadem Inc. Written permission must be obtained to reprint or use any of this information. AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net...