Attaching To Ac Power - Vadem Clio C-1050 Series User Manual

Battery Pack door
Bottom View of Clio
FIGURE 1-2

Attaching to AC Power

To attach Clio to AC power, plug the mini-connector end of the
AC adaptor cable into Clio and the two-pronged end into a
standard 110V AC power outlet. You can also attach the device to
AC power using the Travel Dock (refer to "Connecting with the
Travel Dock" on page 2-2).
When you attach Clio to AC power, the batteries automatically
recharge. You can use the device while your batteries are
recharging. In fact, it is recommended that you always use AC
power when you are near an outlet to insure your batteries stay
fully charged for when you travel.
Important: Use only the AC power adapter supplied with Clio.
If you need to replace the adapter, go to the Vadem
web site,
http://www.vadem.com,
for information on how to order replacement.
Clio User Manual
Compact Flash Slot (internal, not shown)
Memory Module Cover
Speaker
PC card slot
Attaching to AC Power
Reset button
PC Card ejector
1-3