Calligrapher® 5.3; Starting Calligrapher - Vadem Clio C-1050 Series User Manual

Using the Bundled Programs
®
CalliGrapher 5.3
CalliGrapher is an electronic inking and handwriting recognition
program that allows you to write or draw on the Clio screen, then
store your writing as ink, or have your writing converted to text.
The Recognition mode of CalliGrapher converts your writing –
cursive, print or mixed mode – to text for input into any program.
The ScreenDraw mode of CalliGrapher captures your writing and
drawing as an ink overlay on the Clio screen. You can then save
your ink to a file.

Starting CalliGrapher

You can start CalliGrapher in three ways:
• Select the Calligrapher desktop icon.
• Select Start > Programs > Vadem > CalliGrapher.
• By default, CalliGrapher will start when you put Clio into
tablet position.
Note: You can change this default setting from the Clio con-
trol panel. Open the control panel by selecting Start >
Settings > Control Panel, then select Tablet Mode
Autostart.
When CalliGrapher is running, two icons are displayed in the
taskbar (lower right of the screen, as in Figure 6-2): the
Recognition mode icon and the ScreenDraw mode icon. The
highlight shows which mode is on.
6-6 Clio User Manual