Cycling Power - Vadem Clio C-1050 Series User Manual

Getting Acquainted with Clio

Cycling Power

Clio is ready to use as soon as you power on. Unlike a PC, Clio
does not need to boot up or shut down.
There are three ways to power on and off:
• Power Button. To power on, press the Power Button (large
button recessed into the frame to the right of the display). To
power off, press this same button.
• Opening and Closing Clio. This is an optional feature you can
set using the Power Manager Control Panel. When this feature
is enabled and you close Clio with the screen facing down, it
powers off. When you open Clio, it powers on.
• Docking with the PC. When you dock Clio to your PC using
the Travel Dock or Serial Cable, your Clio will automatically
power on as part of establishing a partnership with your PC
(refer to Chapter 2, "Setting up a Partnership with a Desktop
PC").
Note:
If the screen does not appear to be on after you power on the
device, you may need to adjust the screen brightness and
contrast (refer to "Adjusting Contrast/Brightness" on page 1-
15). The Clio screen takes a few seconds to reach full
brightness after you turn on the device.
1-6 Clio User Manual