Removing Or Replacing The Battery Pack - Vadem Clio C-1050 Series User Manual

Getting Acquainted with Clio
Note: The IR port and the serial port cannot work simulta-
neously.

Removing or Replacing the Battery Pack

For certain operations, such as installing more memory or install-
ing certain types of PC cards, you will need to remove the battery
pack. Also, if the battery becomes defective, you'll need to
replace it. Follow the steps in this section to safely handle the bat-
tery pack.
Warning: Never open the battery pack door or remove the battery pack
without FIRST shutting off the device. REMOVING THE
BATTERY WHILE THE DEVICE IS ON MAY CAUSE
YOU TO LOSE ALL OF YOUR DATA.
Remove the battery pack door.
1.
With Clio face down on a flat surface and the back of the
2.
device facing you, grasp the tabs on the back of the battery
pack door and lift away from you (Figure 1-11).
1-22 Clio User Manual