Synchronizing With A Desktop Computer - Vadem Clio C-1050 Series User Manual

Setting Up Remote Networking
Select your Ethernet driver, then tap Properties.
a.
Most networks use DHCP, so you should not have to
change these settings.
In the Identification tab, enter your name, password, and
b.
domain.
See your network administrator if you need assistance.
Once connected, you can use Pocket Internet Explorer to visit
intranet Web pages and Inbox to send and receive e-mail.
Note: Before using Inbox, you need to provide the informa-
tion it needs to communicate with the mail server. For
instructions, see "Inbox: Sending and Receiving E-
mail Messages" on page 3-10.

Synchronizing with a Desktop Computer

To synchronize remotely, the following conditions must be met:
• You must first establish a partnership between your device and
desktop computer while at your desktop computer. The
partnership cannot be established remotely.
Refer to "Setting up Communications" on page 2-4.
• The desktop computer must be powered on and you must be
logged in. Schedule+, Exchange, or Outlook must be running
with your user profile.
• In the lower-right corner of the ActiveSync window, the
connection status must display "Waiting for mobile device to
connect."
• Synchronization must be enabled or set to "Automatically
synchronize if data is out-of-date."
To verify this, check the ActiveSync Options dialog box.
• Auto Connect must be set to "At all times" in ActiveSync.
3-6 Clio User Manual