Creating A Dial-Up Connection To A Modem - Vadem Clio C-1050 Series User Manual

Creating a Dial-up Connection to a Modem

To create a dial-up connection to a modem attached to a desktop
computer:
Perform any relevant prerequisite steps:
1.
If you are a Windows 95 user, install the Dial-Up Net-
a.
working Upgrade 1.2.
If User Level Access is enabled in Dial-Up Networking,
b.
create a user account.
If you are a Windows 98 user, you will need to add a sec-
c.
ond dial-up adapter.
For more information about any of these prerequisites, see
ActiveSync Help.
Follow the modem manufacturer's directions to install a
2.
modem on your desktop computer.
Note the telephone number for your desktop computer
3.
modem.
On your desktop computer, open the Mobile Device folder.
4.
Tap File > Communications.
Under "Device Connections via Serial Port", tap your
5.
modem in the Ports list.
Tap "Enable mobile device connection."
6.
Tap "Enabled" in both "Device Connections via Serial
7.
Port" and "Device Connections via Network."
To create the connection, refer to "Connecting to an ISP"
8.
on page 3-2.
Substitute the phone number you noted in step 3 for the ISP
dial-in number.
Clio User Manual
Creating a Dial-up Connection to a Modem
3-9