My Screen Is Dark; Clio's Notify Button Is Not Working; The System Is Not Responding Properly To The Stylus Taps - Vadem Clio C-1050 Series User Manual

• After trying the above, make sure the main battery is installed
and the battery door is correctly seated and closed securely.
There is a safety switch that will not allow the device to
operate if the battery door is not correctly snapped into place.
• Make sure the memory module cover is seated and screwed
down correctly. There is a safety switch that will not allow the
device to operate if the memory module cover is not on
properly.
• If none of the above turns the device on, use the stylus to press
the reset button located on the underside of the device, then try
to power the device on again.

...my screen is dark?

• Prolonged exposure to sunlight may cause your Clio's screen
to temporarily darken. This is normal for LCD screens and is
not permanent.
• Adjust the contrast—A
A +G
LT REATER
) or A +P
LT
point where it appears to be off.

...Clio's Notify button is not working?

Make sure you have the correct date and time information in
Clio's World Clock window, and also confirm that you have
selected the audio and video alarm options you expect. If these
measures don't work, call Vadem Service at 1-888-GO VADEM.

...the system is not responding properly to the stylus taps?

• You may need to recalibrate the stylus settings. To do this, tap
on Start > Settings > Control Panel, then double-tap on the
Stylus icon.
A-2
+L T
LT ESS
T (>), and the brightness —A
HAN
(+). The screen may have been darkened to the
LUS
(<) or
HAN
+M
LT INUS
Clio User Manual
(-