Vadem Clio C-1050 Series User Manual page 49

Inserting a ROM Module
FIGURE 1-19
Install the new ROM module.
6.
The ROM and RAM modules have unique connectors that
will not accept the wrong module. Align the connectors on the
module with the connectors in the Clio. Then firmly and
evenly snap into place. Make sure the module is firmly seated
in place. Do not force it.
Replace the memory module cover.
7.
Be sure the cover is firmly in place. Clio will not power on if
the cover is not in place. Replace the screw and carefully
tighten. Do not overtighten the screw.
Replace the battery pack (see "Removing or Replacing the
8.
Battery Pack" on page 1-22 for instruction).
Optionally, reconnect AC power.
9.
Power on the device.
10.
Synchronize with your desktop PC to restore your data.
11.
Clio User Manual
RAM
ROM
Memory
1-31