Installing Rom - Vadem Clio C-1050 Series User Manual

Getting Acquainted with Clio

Installing ROM

Warning: Never open the battery pack door or remove the battery pack
without FIRST shutting off the device. REMOVING THE
BATTERY WHILE THE DEVICE IS ON MAY CAUSE
YOU TO LOSE ALL OF YOUR DATA.
You can upgrade the ROM module in Clio:
• A new ROM module may be necessary to upgrade to a new
release of the operating system.
To replace the ROM:
Synchronize information to your desktop PC.
1.
Backup any files or programs you need. Refer to
"Synchronizing Files and File Conversion" on page 2-9.
Disconnect any AC power connection, including the travel
2.
dock.
Open the battery pack door and rotate the battery pack
3.
away from contacts.
Remove the memory module cover, using a phillips
4.
screwdriver.
Remove the ROM module currently in the device.
5.
Under the memory module cover are two modules. With Clio
face down and its Notification LED/switch light facing you,
the ROM module is on the right and the RAM on the left. Put
your fingers around the ROM module and lift it out.
Refer to Figure 1-19.
1-30 Clio User Manual