Taking Pictures That Match The Scene Being Recorded (Scene Mode) - Panasonic LUMIX DMC-TS1 Operating Instructions Manual

¿
[REC] mode:
Taking pictures that match the scene being
recorded
(Scene mode)
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [¿].
Press 3/4/2/1 to select the scene mode.
•
You can switch menu screens from any menu item by sliding the
zoom lever.
Press [MENU/SET] to set.
•
The menu screen is switched to the recording screen in the
selected scene mode.
∫ About the information
•
If you press [DISPLAY] when selecting a scene mode in step
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
•
To change the scene mode, press [MENU/SET] and then press 1, and return to step
•
The scene mode flash setting is reset to the initial setting when the scene mode is changed.
•
When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
•
The following items cannot be set in scene mode because the camera automatically adjusts
them to the optimal setting.
–
[INTELLIGENT ISO]/[SENSITIVITY]/[I.EXPOSURE]/[COLOR MODE]/[MIN. SHTR SPEED]
•
[I.EXPOSURE] is activated automatically in the following scene modes.
–
[PORTRAIT]/[SOFT SKIN]/[TRANSFORM]/[SELF PORTRAIT]/[SCENERY]/
[NIGHT PORTRAIT]/[PARTY]/[CANDLE LIGHT]/[BABY1]/[BABY2]/[SUNSET]/
[HIGH SENS.]/[FLASH BURST]
•
Shutter speed for scene modes, except [NIGHT PORTRAIT], [NIGHT SCENERY],
[CANDLE LIGHT], [BABY1]/[BABY2], [PET], [FLASH BURST], [STARRY SKY] and
[FIREWORKS], will be from 1/8th of a second to 1/1300th of a second.
Advanced (Recording pictures)
- 67 -
2
,
2
above.