[Audio Dub.] - Panasonic LUMIX DMC-TS1 Operating Instructions Manual

Digital camera model no. dmc-ts1
Hide thumbs Also See for LUMIX DMC-TS1:
Table of Contents

Advertisement

You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu.
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
Audio is recorded from the built-in microphone on the camera.
If you press [‚], the audio dubbing is cancelled.
Press [MENU/SET] to stop recording.
It will automatically stop after recording about 10 seconds without
pressing [MENU/SET].
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
Note
Audio dubbing may not work properly on pictures recorded by other equipment.
Audio dubbing does not work on motion pictures and protected pictures.
Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital camera (LUMIX) launched before July 2008.
Advanced (Playback)

[AUDIO DUB.]

- 144 -
(P27)

Advertisement

Table of Contents
loading

Table of Contents