Panasonic LUMIX DMC-TS1 Operating Instructions Manual page 187

An unreadable language was selected by mistake.
> Press [MENU/SET], select the [SETUP] menu icon [
the desired language.
White lamp may come on when the shutter button is pressed halfway.
•
AF assist lamp (P116)
The AF assist lamp does not turn on.
•
Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]?
•
The AF assist lamp does not turn on in bright places.
The camera becomes warm.
•
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
A part of the camera such as the zoom lever and card/battery door, and terminal
cover does not move.
•
The temperature of the camera may fall and the camera parts may not work well if you leave it
as it is after taking it out of water, snow etc. following use in a cold environment such as low
temperature water or on a snow-covered mountain etc. This is not a malfunction. The camera
will recover after returning to normal temperature.
The lens clicks.
•
When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
> When the message [PLEASE SET THE CLOCK] appears, set the clock again. When you
take a picture before setting the clock, [0:00
Others
(P36)
will turn on white in the dark place to assist the focusing.
- 187 -
Others
] and then select the [~] icon to set
(P116)
0. 0. 0] is recorded. (P25)